SageTV Community  

Go Back   SageTV Community > Hardware Support > Hardware Support
Forum Rules FAQs Community Downloads Today's Posts Search

Notices

Hardware Support Discussions related to using various hardware setups with SageTV products. Anything relating to capture cards, remotes, infrared receivers/transmitters, system compatibility or other hardware related problems or suggestions should be posted here.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-29-2022, 10:47 PM
mgpaulus mgpaulus is offline
Sage Advanced User
 
Join Date: Mar 2011
Location: Colorado Springs, CO
Posts: 193
Resolved (Sort of): OpenDCT: Not tuning a channel from HDHR-CC

Hi,

I have a couple of HDHR-CC that haven't had any problems with OpenDCT for a while now. However, recently, I've noticed that channel 711 - CBS HD on my Xfinity network is not being able to be tuned. When I've watched the logs, I can see this error:

Quote:
22:34:21.955 [SageTVRequestHandler-152CT-HDHomeRun Prime Tuner 1321411B-1] INFO HDHRNativeCaptureDevice - Starting the encoding for the channel '711' from the device 'DCT-HDHomeRun Prime Tuner 1321411B-1' to the file 'd:\Videos\DCT-HDHomeRun Prime Tuner 1321411B-1 on 1270019000 Digital TV Tuner-0.mpgbuf' via the upload id '1131211942'...
22:34:21.955 [SageTVRequestHandler-152CT-HDHomeRun Prime Tuner 1321411B-1] INFO ChannelManager - Auto-map failed to get the frequency and program for the channel '711'.
22:34:21.955 [SageTVRequestHandler-152CT-HDHomeRun Prime Tuner 1321411B-1] WARN HDHRNativeCaptureDevice - Unable to tune channel because no references were found for this channel number. Will attempt to tune as vchannel.
And for ChannelManager, I can see this:
Quote:
22:32:37.191 [ChannelManager-56] INFO ChannelManager - Updating the HDHomeRun channel lineup HDHomeRun DRI Tuner 1321411B (dct_hdhomerun).
22:32:37.192 [ChannelManager-56] INFO HDHomeRunChannels - Connecting to HDHomeRun using the URL 'http://192.168.0.66:80/lineup.xml'
In fact, I thought 711 was an isolated incident, but it turns out that after further testing, the only channel I seem to bel able to tune at this time is 727 - Hallmark.

So, my question is, is there a way I can get further down into ChannelManager to see why automap isn't finding the channels from the HDHR listing, because those channels are definitely there in the xml:

HTML Code:
<Program><GuideNumber>705</GuideNumber><GuideName>KOAADT</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v705</URL></Program>
<Program><GuideNumber>707</GuideNumber><GuideName>KXTULD</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v707</URL></Program>
<Program><GuideNumber>708</GuideNumber><GuideName>KTSCDT</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v708</URL></Program>
<Program><GuideNumber>709</GuideNumber><GuideName>GALAHD</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v709</URL></Program>
<Program><GuideNumber>711</GuideNumber><GuideName>KKTVDT</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v711</URL></Program>
<Program><GuideNumber>712</GuideNumber><GuideName>KBDIDT</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v712</URL></Program>
<Program><GuideNumber>713</GuideNumber><GuideName>KRDODT</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v713</URL></Program>
<Program><GuideNumber>714</GuideNumber><GuideName>QVCHD</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v714</URL></Program>
<Program><GuideNumber>715</GuideNumber><GuideName>NEWSNTN</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v715</URL></Program>
<Program><GuideNumber>720</GuideNumber><GuideName>COOKHD</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v720</URL></Program>
<Program><GuideNumber>721</GuideNumber><GuideName>KXRMDT</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><URL>http://192.168.0.66:5004/auto/v721</URL></Program>
<Program><GuideNumber>722</GuideNumber><GuideName>DXDHD</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v722</URL></Program>
<Program><GuideNumber>723</GuideNumber><GuideName>DFCHD</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v723</URL></Program>
<Program><GuideNumber>724</GuideNumber><GuideName>UKIDSH</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v724</URL></Program>
<Program><GuideNumber>725</GuideNumber><GuideName>GSNHD</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v725</URL></Program>
<Program><GuideNumber>726</GuideNumber><GuideName>NGWIHD</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><URL>http://192.168.0.66:5004/auto/v726</URL></Program>
<Program><GuideNumber>727</GuideNumber><GuideName>HALLHD</GuideName><VideoCodec>H264</VideoCodec><AudioCodec>AC3</AudioCodec><HD>1</HD><Favorite>1</Favorite><URL>http://192.168.0.66:5004/auto/v727</URL></Program>
One of my HDHR-CC entries in opendct.properties:
Quote:
sagetv.device.-199338275.always_force_external_unlock=false
sagetv.device.-199338275.consumer=opendct.consumer.DynamicConsumerImpl
sagetv.device.-199338275.delay_to_wait_after_tuning=0
sagetv.device.-199338275.device_name=DCT-HDHomeRun Prime Tuner 131B4C09-0
sagetv.device.-199338275.encoder_listen_port=9000
sagetv.device.-199338275.encoder_merit=0
sagetv.device.-199338275.encoder_pool=dct
sagetv.device.-199338275.exclusive_server_address=
sagetv.device.-199338275.fast_network_encoder_switch=true
sagetv.device.-199338275.last_channel=-1
sagetv.device.-199338275.transcode_profile=

Last edited by mgpaulus; 10-30-2022 at 04:34 PM.
Reply With Quote
  #2  
Old 10-30-2022, 04:30 PM
mgpaulus mgpaulus is offline
Sage Advanced User
 
Join Date: Mar 2011
Location: Colorado Springs, CO
Posts: 193
Just as a follow up:

I think that somehow the dct_homerun.properties either got stale ($openrun_home/config/lineup/dct_homerun.properties) or got borked.

I decided to stop opendct, remove that file, and start up. Seems all of my missing channels are now present and available.

I suppose it would/could be an exercise in code archeology to see if I could figure out WHY the lineup wasn't updating with all of my channels, but at this point, I'm not sure I have the time to dig.

Anyway, just an update, and I'll update the title to reflect that the issue is no longer a deal breaker for me.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Q about OpenDCT/HDHR and pooling/locking mgpaulus Hardware Support 3 11-16-2020 06:55 AM
OpenDCT on Docker not finding HDHR BobbyDing SageTV for unRAID/Docker 43 03-28-2017 06:40 AM
problem tuning single channel with OpenDCT Docker matt91 SageTV for unRAID/Docker 1 01-25-2017 01:58 PM
channel tuning issue with HDHR granto Hardware Support 1 09-04-2011 08:04 AM
HDHR not tuning to correct channel with SageTV nethead Hardware Support 25 10-22-2009 06:51 PM


All times are GMT -6. The time now is 11:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.
Copyright 2003-2005 SageTV, LLC. All rights reserved.